With the continuous progress of society, the requirements for automation are becoming higher and higher, and automatic moulds emerge at the historic moment, such as automatic polyurethane foam moulds for headrest. The foam mold comprises an electrical control system, a support and a mold, the mold comprises an upper die cover, the upper die cover to push the cylinder, the upper die, the upper die to push the cylinder frame, the lower die and the lower die to push the cylinder, the lower die by rotating the bracket is installed on the support, the upper die is set up above the lower die arc cavity cavity; The upper die cover is connected with the lower cavity of the lower die arc cavity, the upper die cover driving cylinder is arranged on the side of the upper die cover, the upper die cover driving cylinder is embedded in the arc cavity, the upper die cover driving cylinder to push the upper die cover cover closing cavity, and the lower die, closing die to form a complete headrest cavity. The mold can realize automatic opening and closing function of foaming mold through three groups of cylinders and electric control system, which can reduce labor intensity of workers and improve work efficiency.

Guangdong Fate Mechanical and electrical Technology Co., Ltd. is located in Shenghui North Industrial Zone, Nantou Town, Zhongshan City, Guangdong Province, is a set of research and development, production, sales, after-sales service in one of the polyurethane machinery automation production enterprises. We research and manufacture all kinds of polyurethane foam casting machine, polyurethane foaming machine, automatic production line (suspension line/trajectory/disk line, etc.), automatic foaming mold mold frame, the polyurethane foam of complete sets of equipment, such as mechanical arm to help thousands of polyurethane products production enterprise users to "high rate of good products, low equipment fault rate.