When there is a fault in a specific part of the Fuleite polyurethane foaming machine, the monitoring point will send a message, and a flashing mark will immediately appear on the display screen to indicate where the fault is. The program will automatically take corresponding protection according to the fault location, such as shutdown, partial shutdown and injection stop. The alarm will sound alarm, and the operator should repair according to the fault location.

If the fault has been eliminated, press the button and the previously displayed fault text will disappear, and the fault that has not been eliminated will continue to be displayed. It will not disappear until some faults are eliminated.

It must be remembered that when the equipment sends out a fault alarm signal, the fault must not be cleared easily. Press and hold the button, first find out the cause of the fault display, and then analyze the cause according to the displayed information to finally solve the problem of using the polyurethane foaming machine.