Foaming machine is a kind of foam equipment which makes foaming agent into aqueous solution of a certain concentration. Foaming agent itself can not automatically become foam, it must be foamed through the mechanical action of foaming machine. 

The characteristics of the two components of the original liquid, through the ratio and high-speed mixing, by two high-precision metering pumps, the two components of the liquid are transported to the mixing head. 

Features through high-speed strong stirring, so that the material and liquid uniform and ejected to form the required products. 

There are many characteristics of foaming machine, let's explain it below. 

Characteristics of polyurethane foaming machine: 

Features 1. It has the characteristics of small size, light weight, low failure rate, simple operation, convenient movement and so on. 

2. Adopt advanced ventilation mode to ensure the working stability of the equipment to a large extent. 

Feature 3, equipped with emergency switch system, can respond to emergency situations most quickly. 

Feature 4, equipment operation panel humanized settings, it is easy to master the mode of operation. 

Polyurethane foaming machine has many characteristics, and it is also widely used at present. 

So what if the polyurethane foaming machine breaks down? 

The first is to check to see if there is a problem with the host, and then to see if it is another problem and deal with it accordingly. 

Foaming machine. 

What are the matters needing attention in the use of the foaming machine? 

The foaming machine manufacturer introduces that the temperature has a great influence on the output and foam quality of the foaming machine. 

Below 30 ℃, the higher the water temperature, the smaller the foam density, the higher the output of the foaming machine. 

However, when the water temperature exceeds 30 ℃, because the foam density is too small, the bubble wall is too thin, and it is easy to defoam, so the yield decreases, so the foaming effect is better when the aqueous solution temperature of foaming agent is controlled in the range of 20 ℃ ~ 30 ℃. 

Foaming machine manufacturer Jiangsu Liangteng Machinery Co., Ltd. is specializing in foaming machine enterprises, if you are interested in our products, please call us. 

A foaming machine is a device that can make foam from an aqueous solution of a certain concentration of foaming agent. 

At present, the foaming machine is also a very hot equipment, the more mainstream is the polyurethane foaming machine. 

It is the most widely used foaming machine in the market at present, and it is loved by deep users. 

Each kind of foaming machine has its own method of use, it is impossible for each model to use the same method. 

But the general operation is similar, including foaming liquid preparation, foaming liquid transportation, foaming, foam metering and other process units, but the specific details are different. 

No matter what kind of foaming machine, the formation of foam has two necessary factors, one is the foaming agent solution, the other is air, both of which are indispensable. 

Without a blowing agent solution, the liquid film that surrounds the gas will not form, and there will be no bubbles. 

If there is no gas, there is a solution of foaming agent, and the bubble can not be formed. 

If the foaming machine failure does not have to worry, we will also have the relative processing method, below briefly explains. 

First of all, if the mainframe does not work properly, check to see if it is a switch problem or if the power board is damaged. 

There is or is an error in a part or program, as long as it is dealt with accordingly.